A diverter valve is a type of valve that diverts a single stream of water from a bathtub faucet to a showerhead. Although the valve sounds complicated, its function is actually quite simple. Diverter valves rotate ninety degrees, 180 degrees, and 360 degrees to control the direction of water flow. They also get clogged by sediment and wear out over time.

Diverter valves divert a single stream of water from a tub faucet to a showerhead

Diverter valves divert a single showerhead stream from a tub faucet into a dual stream. They allow you to control how much water flows from one faucet to the other and save you money on plumbing costs. The plumber will be able to advise you on the best shower valve for your home. Before choosing a valve, make sure that you understand how the two different outlets work together and how the different types of valves connect to one another.

The valve body should be installed upside down to ensure that water is diverted to the showerhead first. If it doesn’t, you might have to install it on the opposite side to prevent the water from being stacked incorrectly. Also, it is important to install the flow director in the side of the valve where water enters the body.

They can rotate 90 degrees, 180 degrees or 360 degrees

There are three basic configurations of diverter valves. The first configuration is the two- way ball valve. This configuration has two ports, one at the bottom and one on top, and has a 90-degree cutoff position. The second configuration diverts flow from the left port to the right port by turning the handle counter-clockwise by 90 degrees.

Another type of diverter valve is the L-pattern valve. This type is similar to a two-way valve but has an L-pattern that allows flow to divert to two different outlets. These valves can rotate 90 degrees counterclockwise, 180 degrees, or 360 degrees.

Rotational diverter valves use a shaft with a seal mounted on its axis. The seal blocks one of the two outlet ports. A rotary diverter valve can also have a seal between the outlet ports, so that fluid from the inlet exits through both. Rotation of the shaft causes a seal to wear, and a faulty one may prevent the valve from functioning properly.

They can become worn out or clogged by sediment

A diverter valve is one of the household plumbing system components that can become worn out or clogged. It allows water from a bathtub or shower to come out of one pipe and flow into another. If the diverter valve gets worn out or becomes clogged, it may need to be replaced. These valves are easily repaired and can be purchased at most home improvement centers. When replacing a diverter valve, it is important to follow the instructions that come with the valve.

Diverter valves can also become clogged with sediment over time. This may lead to a leaking faucet or water that leaks through the face plate. Diverter valves can also be clogged with calcium deposits or worn parts. To get more information about Diverter Valve; https://polimak.com/en/urun/diverter-valves-and-flow-control-valves/